|
Each of the Throttle Body Injector product pages has
detailed dimension information. When converting from a conventional carburetor
or fuel injection system to the Ellison Throttle Body Injector there will be a
difference in the spacing from engine mounting flange to the air box flange, in
other words the space taken up by the Throttle Body. The chart below provides
approximate dimensions of this Flange-to-Flange distance as a reference. Also
note that throttle and mixture control cable installation will be different. Be
sure to verify the dimensions for your specific installation.
|
THROTTLE BODY/ CARBURETOR |
FLANGE-TO-FLANGE DIMENSION - INCHES |
|
EFS-3A |
4.06 |
|
EFS-4 |
4.13 |
|
EFS-4-5 |
4.88 |
|
|
|
|
MA-3 |
4.27 |
|
MA-4SPA |
4.59 |
|
MA-4-5 |
6.39 |
|
HA-6 |
6.63 |
|
PS-5C |
5.50 |
|
RSA-5 |
5.50 |
|
